GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 2WD 🢒 Transmission 🢒 Manual Transmission - Aisin AR5 🢒 Shift Control Housing Assemble

    Object Number: 880940 Size: SH
  1. Lubricate the shift lever plungers and the lever spring seat surface of the shift control housing with transmission fluid.
  2. Install the shift control lever assembly into the shift control housing.

    3. Object Number: 880937 Size: SH

    Note: Do not use a petroleum base or silicon lubricate on the shift control lever seals or boots. If a lubricant is required, use a water base liquid soap.

  3. Install the shift control lever shaft boot in the retainer.
  4. Install a control lever housing gasket to the housing.
  5. Install the shift control lever retainer.

    6. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the shift control lever retainer bolts and tighten to 20 N·m (14 lb ft).

    7. Object Number: 880928 Size: SH
  7. Install the control lever boot.

    8. Object Number: 880926 Size: SH
  8. Install the shift control lever shaft seal.