GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 2WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Hinge Replacement - Door Side

Removal Procedure

    Object Number: 1256466 Size: SH
  1. Open the rear door.

  2. Remove the bolt retaining the rear door check link to the body.

  3. Remove the rear door wiring harness grommet from the body and disconnect the door wiring harness connectors. Refer to Rear Side Door Wiring Harness Replacement.

    4. Object Number: 1256440 Size: SH
  4. Remove the bolts (1) retaining the rear door hinge keeper straps.
  5. With the aid of an assistant, lift the rear door up off the body side hinges and place the door on a clean, protected surface.

    6. Object Number: 1302496 Size: SH
  6. Remove the bolts retaining the door side hinges to the door.
  7. Remove the hinges from the door.

Installation Procedure

    Object Number: 1302496 Size: SH
  1. Position the door side rear door hinge to the door.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts retaining the door side door hinge to the door and tighten to 25 N·m (18 lb ft).

    3. Object Number: 1256440 Size: SH
  3. With the aid of an assistant, lower the rear door down onto the body side hinge straps.
  4. Install the bolts (1) retaining the rear door hinge keeper straps and tighten to 25 N·m (18 lb ft).
  5. Connect the rear door wiring harness connectors and install the rear door wiring harness grommet to the body. Refer to Rear Side Door Wiring Harness Replacement.

    6. Object Number: 1256466 Size: SH
  6. Install the bolt retaining the rear door check link to the body and tighten to 25 N·m (18 lb ft).
  7. Inspect the door for proper operation and alignment. Refer to Rear Door Adjustment.