GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 2WD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Side Door HingeReplacement - Body Side

Removal Procedure

    Object Number: 1256449 Size: SH
  1. Open the front door.
  2. Remove the bolt retaining the front door check link to the body.
  3. Remove the front door wiring harness grommet from the body, and disconnect the door wiring harness connectors. Refer to Front Side Door Wiring Harness Replacement.

    4. Object Number: 1256436 Size: SH
  4. Remove the bolts (1) retaining the front door hinge keeper straps.
  5. With an assistant, lift the front door up off the body side hinges, and place on a clean protected surface.

    6. Object Number: 1265473 Size: SH
  6. Clean the mounting surfaces of the body side hinges with a clean rag, and mark the front door hinge locations with a grease pencil, or other suitable marker.
  7. Remove the bolts retaining the body side hinges to the body.
  8. Remove the hinges from the body.

Installation Procedure

    Object Number: 1265473 Size: SH
  1. Position the body side front door hinge to the alignment marks.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts retaining the body side door hinge to the body and tighten to 27 N·m (20 lb ft).

    3. Object Number: 1256436 Size: SH
  3. With an assistant, lower the front door down onto the body side hinge straps.
  4. Install the bolts (1) retaining the front door hinge keeper straps and tighten to 25 N·m (18.4 lb ft).
  5. Connect the front door wiring harness connectors, and install the front door wiring harness grommet to the body. Refer to Front Side Door Wiring Harness Replacement.

    6. Object Number: 1256449 Size: SH
  6. Install the bolt retaining the front door check link to the body and tighten to 25 N·m (18.4 lb ft).
  7. Inspect the door for proper operation and alignment. Refer to Front Side Door Adjustment.