GM Service Manual Online
For 1990-2009 cars only

Tools Required:

J 41816-2 Crankshaft End Protector


    Object Number: 856226  Size: SH
  1. Remove and discard the crankshaft balancer bolt.

  2. Object Number: 856227  Size: SH
  3. Install J 41816-2 into the end of the crankshaft.
  4. Important: Do not pull on outer edge of the crankshaft balancer.

    Important: The friction washer may come off with the crankshaft balancer.

  5. Use a three jaw puller to remove the crankshaft balancer.
  6. Remove J 41816-2 .