Removal Procedure
- Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
- Disconnect the atmospheric vent hose (2)
from the air cleaner resonator (1).
- Loosen the air cleaner resonator outlet
duct clamp (4).
- Remove the 2 air cleaner resonator bolts (1).
- Complete the following in order to remove the air cleaner resonator (2)
and outlet duct from the engine:
5.1. | Lift upward on the assembly. |
5.2. | Disconnect the following: |
- | The crankcase ventilation hose (3) from the camshaft cover |
- | The outlet duct (4) from the throttle body |
5.3. | Remove the assembly (2) from the engine. |
Installation procedure
- Complete the following in order to install
the air cleaner resonator (2) and outlet duct to the engine:
1.1. | Position the outlet duct (4) over the throttle body assembly. |
1.2. | Install the crankcase ventilation hose (3) to the camshaft cover
port. |
1.3. | Align the air cleaner outlet resonator bolts (1) with the captured
nuts on the camshaft cover. |
Important: Ensure the outlet duct is properly installed to the throttle body assembly.
- View into the air cleaner resonator to ensure the outlet duct is not rolled
under at the throttle body assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Properly position the air cleaner resonator outlet duct clamp (4).
Tighten
Tighten the air cleaner resonator outlet duct clamp (4) to 6 N·m
(53 lb in).
- Install the 2 air cleaner outlet resonator to camshaft cover bolts (1).
Tighten
Tighten the air cleaner resonator bolts to 6 N·m (53 lb in).
- Connect the atmospheric vent hose (2)
to the air cleaner resonator (1).
- Install the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.