Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the insulator clamp bolts.
- Remove the clamps.
- Remove the insulators.
- Inspect all of the parts for wear and damage.
Installation Procedure
- Install the insulators to the stabilizer shaft .
- Install the clamps over the insulators and the stabilizer shaft.
Notice: Refer to Fastener Notice in the Preface section.
- Install insulator clamp bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Lower the vehicle.