Removal Procedure
- Lower the front portion of the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Disconnect the electrical connectors from the
antenna assembly.
- Loosen the retaining nut until the assembly can be removed from the roof
panel.
- Using an upward motion, remove the antenna assembly from the roof.
Installation Procedure
- Install the antenna assembly from the top of
the roof.
- Lower the antenna assembly to the roof panel, ensuring the anti-rotation
pin is properly indexed.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the retaining nut.
Tighten
Tighten the nut to 6 N·m (53 lb in).
- Connect the antenna electrical connectors.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior
Trim.