Test Description
The numbers below refer to the step numbers on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
This step checks for DTCs in the body control module (BCM) and the powertrain control module (PCM).
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Yes | No |
|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications |
Does the scan tool communicate with the BCM and PCM? | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |
Select the BCM and PCM display DTCs function on the scan tool. Does the scan tool display any DTCs? | Go to Step 4 | ||
Does the scan tool display any DTCs which begin with a "U"? | Go to Diagnostic Trouble Code (DTC) List in Data Link Communications | Go to Step 5 | |
5 | Does the scan tool display DTC B1000? | Go to Diagnostic Trouble Code (DTC) List in Body Control System | Go to Step 6 |
6 | Does the scan tool display DTC P0713, P0719, or P0724? | Go to Diagnostic System Check - Automatic Transmission in Automatic Transmission - 4L60-E/4L65-E | Go to Step 7 |
7 | Does the scan tool display DTC B2707 or B2708? |
