Warning messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. More than one message may appear at one time. They will appear one after the other. The messages are displayed for three seconds each. Some messages may not require immediate action but you should press and release the trip odometer reset stem to acknowledge that you received the message and clear it from the display. Each message must be acknowledged individually. Some messages cannot be cleared from the display because they are more urgent. These messages require action before they can be removed from the DIC display. The following are the possible messages that can be displayed and some information about them.

This message will be displayed when the engine coolant temperature is too high and the air conditioning in your vehicle needs to be turned off. See and Engine Overheating and Climate Control System for more information. It will be displayed along with the ENG HOT message.

This message will be displayed on the DIC if there is a problem with your antilock brake system. Check your antilock brake system as soon as possible and have your vehicle serviced by your GM dealer. See Brakes and Antilock Brake System (ABS) Warning Light for more information. Press and release the reset stem to acknowledge the message and clear it from the DIC display.

This message will be displayed when there is a problem with your vehicle's battery. See Battery and Battery Warning Light for more information.

This message will be displayed on the DIC if there is a problem with your brakes. Check your brakes as soon as possible and have your vehicle serviced by your GM dealer. See Brakes and Brake System Warning Light for more information. Press and release the reset stem to acknowledge the message and clear it from the DIC display.

This message will be displayed on your DIC when the oil needs to be changed. Check the oil in your vehicle as soon as possible and have your vehicle serviced by your GM dealer. See Engine Oil and Scheduled Maintenance for more information. Press the reset stem to acknowledge the message and clear it from the display.

This message will be displayed on your DIC when one of your doors is ajar. You should check all the doors on your vehicle to make sure they are closed. The message will clear from the display after all of the doors are closed.

This message will be displayed on your DIC when your engine coolant temperature is hot. Check your engine coolant temperature gage. See Engine Coolant Temperature Gage for more information. You should have your vehicle serviced by your GM dealer as soon as possible if you suspect your engine is overheating. See Engine Overheating for more information.

This message will be displayed on the DIC if your brake fluid is low. Check the brake fluid as soon as possible and have your vehicle serviced by your GM dealer. See Brakes for more information. Press the reset stem to acknowledge the message and clear it from the DIC display.

This message will be displayed if your vehicle's fuel cap is either off or loose. You should pull over and check to see if your vehicle's fuel cap is secure as soon as possible. You may also see the check engine light on the instrument panel cluster. See Malfunction Indicator Lamp for more information. Press the reset stem to acknowledge the message and clear it from the display.

This message will be displayed on your DIC if the level of fuel in your vehicle is low. You should also check your fuel gage. See Fuel Gage for more information. You should fill your vehicle's tank as soon as possible.

If you have the Traction Control System (TCS), you will see this message when the TCS is active. See Traction Control System (TCS) for more information. Press and release the reset stem to acknowledge the message and clear it from the DIC display.

This message will be displayed when your oil pressure is low. See Oil Pressure Light , and Engine Oil for more information.

This message will be displayed when your GM Oil Life System needs to be checked. Press the reset stem to acknowledge the message. For more information, see "GM Oil Life System" under DIC Controls and Displays .

This message will be displayed when your vehicle's parking brake is active. See Parking Brake and Brake System Warning Light for more information. The message will clear from the display after the parking brake is released.

This message will be displayed on your DIC when your vehicle's engine power is reduced. Press the reset stem to acknowledge the message and clear it from the display.

This message will be displayed on your DIC when there is a problem with your transfer case control system. Check the transfer case on your vehicle and have it serviced by your GM dealer. See Four-Wheel Drive for more information about your transfer case. Press the reset stem to acknowledge the message and clear it from the display.

If you have the Traction Control System (TCS), you may see this message if there is a problem with your Traction Control System (TCS). Check your TCS as soon as possible and have your vehicle serviced by your GM dealer. See Traction Control System (TCS) for more information. Press the reset stem to acknowledge the message and clear it from the display.

This message will be displayed on your DIC if your vehicle needs service. You should have your vehicle serviced by your GM dealer as soon as possible.

This message will be displayed on your DIC when your turn signal is on for approximately 0.75 miles (1.2 km) of travel. Press the reset stem to acknowledge the message and clear it from the display.