GM Service Manual Online
For 1990-2009 cars only

Use a vacuum cleaner often to get rid of dust and loose dirt. Wipe vinyl, leather, plastic and painted surfaces with a clean, damp cloth.

Cleaning Fabric/Carpet

Your dealer has cleaners for the cleaning of fabric and carpet. They will clean normal spots and stains very well. You can get GM-  approved cleaning products from your dealer. See Vehicle Care/Appearance Materials .

Here are some cleaning tips:

    • Always read the instructions on the cleaner label.
    • Clean up stains as soon as you can  --  before they set.
    • Carefully scrape off any excess stain.
    • Use a clean cloth or sponge, and change to a clean area often. A soft brush may be used if stains are stubborn.
    • If a ring forms on fabric after spot cleaning, clean the entire area immediately or it will set.

Using Cleaner on Fabric

  1. Vacuum and brush the area to remove any loose dirt.
  2. Always clean a whole trim panel or section. Mask surrounding trim along stitch or welt lines.
  3. Follow the directions on the container label.
  4. Apply cleaner with a clean sponge. Don't saturate the material and don't rub it roughly.
  5. As soon as you've cleaned the section, use a sponge to remove any excess cleaner.
  6. Wipe cleaned area with a clean, water-dampened towel or cloth.
  7. Wipe with a clean cloth and let dry.

Special Fabric Cleaning Problems

Stains caused by such things as catsup, coffee (black), egg, fruit, fruit juice, milk, soft drinks, vomit, urine and blood can be removed as follows:

  1. Carefully scrape off excess stain, then sponge the soiled area with cool water.
  2. If a stain remains, follow the cleaner instructions described earlier.
  3. If an odor lingers after cleaning vomit or urine, treat the area with a water/baking soda solution: 1 teaspoon (5 ml) of baking sold to 1 cup (250 ml) of lukewarm water.
  4. Let dry.

Stains caused by candy, ice cream, mayonnaise, chili sauce and unknown stains can be removed as follows:

  1. Carefully scrape off excess stain.
  2. First, clean with cool water and allow to dry completely.
  3. If a stain remains, follow the cleaner instructions described earlier.

Cleaning Vinyl

Use warm water and a clean cloth.

    • Rub with a clean, damp cloth to remove dirt. You may have to do this more than once.
    • Things like tar, asphalt and shoe polish will stain if you don't get them off quickly. Use a clean cloth and vinyl cleaner. See your dealer for this product.

Cleaning Leather

Use a soft cloth with lukewarm water and a mild soap or saddle soap and wipe dry with a soft cloth. Then, let the leather dry naturally. Do not use heat to dry.

    • For stubborn stains, use a leather cleaner.
    • Never use oils, varnishes, solvent-based or abrasive cleaners, furniture polish or shoe polish on leather.
    • Soiled or stained leather should be cleaned immediately. If dirt is allowed to work into the finish, it can harm the leather.

Cleaning the Top of the Instrument Panel

Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and even make it difficult to see through the windshield under certain conditions.

Cleaning Interior Plastic Components

Use only a mild soap and water solution on a soft cloth or sponge. Commercial cleaners may affect the surface finish.

Cleaning Glass Surfaces

Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See Vehicle Care/Appearance Materials .

Notice: If you use abrasive cleaners when cleaning glass surfaces on your vehicle, you could scratch the glass and/or cause damage to the integrated radio antenna and the rear window defogger. When cleaning the glass on your vehicle, use only a soft cloth and glass cleaner.