GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2005
🢒
Canyon Pickup - 4WD
🢒
Suspension
🢒
Front Suspension
🢒 Front Lower Control Arm Bushing Replacement
Tools Required
J 41805
Ball Joint Remover/Installer
Removal Procedure
Remove the front drive axle, if equipped. Refer to
Differential Carrier Assembly Replacement
.
Remove the lower control arm. Refer to
Lower Control Arm Replacement
.
Before removing the bushing, measure and record the distance from the bushing flange to the bracket. This will be the distance that the new bushing will be installed to.
Using the
J 41805
(1), remove the rear bushing.
Installation Procedure
Using the
J 41805
(1), install the rear bushing.
Install the rear bushing to the predetermined measurement taken earlier.
Install the lower control arm. Refer to
Lower Control Arm Replacement
.
Install the front drive axle, if equipped. Refer to
Differential Carrier Assembly Replacement
.