Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the electrical connector from the
evaporative emission (EVAP) canister vent solenoid valve (4).
- Disconnect the EVAP canister vent solenoid valve (4) from the EVAP
canister (5). Refer to
Plastic Collar Quick Connect Fitting Service
.
- Disengage the bracket retaining tab and remove the EVAP canister vent
solenoid valve (4).
Installation Procedure
- Slide the EVAP canister vent solenoid valve (4)
over the bracket.
Ensure the valve (4) is properly retained to the bracket.
- Connect the EVAP canister vent solenoid valve (4) to the EVAP canister (5).
Refer to
Plastic Collar Quick Connect Fitting Service
.
- Connect the electrical connector to the EVAP canister vent solenoid valve (4).
- Lower the vehicle.