Step | Action | Yes | No |
---|---|---|---|
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Verify that the daytime running lamps (DRL) indicator is inoperative. Does the DRL indicator operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Do the DRL function properly? | Go to Step 4 | |
4 | Using a scan tool, select the IPC Special Functions Display Test to command the DRL indicator ON, then OFF. Does the DRL indicator lamp turn ON and OFF when commanded? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 5 |
5 | Inspect for poor connections at the harness connector of the instrument panel cluster (IPC). Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the IPC. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 7 | -- |
7 |
Did you correct the condition? | System OK | Go to Step 3 |