Tools Required
J 34940
Rivet Gun
Removal Procedure
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
- Carefully spread the handle retainer outward in order to release the latch pin from the latch.
- Remove the latch pin from the latch.
- Remove the seat belt retractor. Refer to
Front Seat Belt Replacement.
- Open the door in order to access the rivets.
Caution: If broken glass falls into the defroster outlets, it can be blown into
the passenger compartment and cause personal injury.
- Cover to protect the following parts from broken glass:
• | Defroster outlets and A/C outlets |
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
- Drill out the rivets retaining the window assembly.
- Thoroughly clean all metal particles that may have lodged inside the body panel.
- Remove the window assembly from the vehicle.
Installation Procedure
- Install the window assembly to the vehicle.
- Using the
J 34940
, or equivalent, install the rivets in order to retain the window assembly to the vehicle.
- Install the seat belt retractor. Refer to
Front Seat Belt Replacement.
- Install the latch pin.
Using a punch, carefully drive the pin into the latch.