GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Canyon Pickup - 4WD 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Cluster Lens Replacement

Removal Procedure
  1. Remove the instrument panel cluster (IPC) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Remove the IPC. Refer to Instrument Cluster Replacement .

    3. Object Number: 1300326 Size: SH
  3. Remove the screws retaining the IPC lens.

    4. Object Number: 1300318 Size: SH
  4. Remove the lens from the IPC.

Installation Procedure

    Object Number: 1300318 Size: SH
  1. Install the lens to the IPC.

    2. Object Number: 1300326 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws to the IPC lens.

    3. Tighten
    Tighten the screws to 1.5 N·m (14 lb in).

  3. Install the IPC. Refer to Instrument Cluster Replacement .
  4. Install the IPC bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .