GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Canyon Pickup - 4WD 🢒 Body 🢒 Interior Trim 🢒 Assist Handle Replacement

Removal Procedure

    Object Number: 1276791 Size: SH
  1. Pull down the assist handle to reveal the 2 service holes.

    2. Object Number: 1364955 Size: SH
  2. Remove the screws and washers securing the assist handle to the retaining clip.
  3. Remove the assist handle from the vehicle.
  4. If replacing the entire assist handle assembly, Remove the retaining clips from the sheet metal.

Installation Procedure
  1. Position the assist handle over the retaining clips.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1364955 Size: SH
  2. Install the assist handle by installing 2 screws and washers into the retaining clips.

    3. Tighten
    Tighten the assist handle screws to 1.2 N·m (10 lb in).


    Object Number: 1276792 Size: SH
  3. In replacing the entire coat hook assembly, press the coat hook and the retaining clip as an assembly into the sheet metal opening until the clip locks into position.