GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Canyon Pickup - 4WD 🢒 Body 🢒 Seats 🢒 Rear Seat Back Latch Replacement

Removal Procedure
  1. Remove the rear bench seat cushion from the vehicle. Refer to Rear Bench Seat Replacement .
  2. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

    3. Object Number: 1333703 Size: SH
  3. Remove the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.

    4. Object Number: 1333780 Size: SH
  4. Remove the 4 screws (2) securing the latch assembly (1) to the seat back frame.
  5. Remove the seat back latch from the seat back frame.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1333780 Size: SH
  1. Remove the seat back latch (1) to the seat back frame with the 4 screws (2).

    2. Tighten
    Tighten the rear bench seat back latch mounting screws to 12 N·m (9 lb ft).


    Object Number: 1333703 Size: SH
  2. Install the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.

    3. Tighten
    Tighten the rear bench seat back latch release strap bracket screws to 1.5 N·m (13 lb in).

  3. Install the screw securing the side trim covers to the seat cushion frame.

    4. Tighten
    Tighten the rear bench seat side trim cover screw to 1.5 N·m (13 lb in).

  4. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  5. Install the rear bench seat cushion in the vehicle. Refer to Rear Bench Seat Replacement .