Jack and Tool Stowage Container Bracket Replacement Regular Cab
Removal Procedure
- Remove the jack stowage cover. Refer to
Jack Stowage Cover Replacement
.
- Remove the jack from the stowage bracket by turning the jack handle to loosen the jack.
- Remove the 2 bolts securing the jack stowage bracket to the vehicle.
Installation Procedure
- Position the jack stowage bracket on the floor stud in the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 bolts securing the jack stowage bracket to the vehicle.
Tighten
Tighten the jack stowage bracket bolts to 9 N·m (79 lb in).
- Install the jack in the stowage bracket by positioning the jack on the 2 studs then turning the jack handle to tighten the jack in the bracket.
- Install the jack stowage cover. Refer to
Jack Stowage Cover Replacement
.