Tools Required
Removal Procedure
- Place the wiper arms in the 1/2 wipe position.
- Turn the ignition key to the OFF position.
- Remove the wiper arms. Refer to
Windshield Wiper Arm Replacement
.
- Remove the air inlet grille panel. Refer to
Air Inlet Grille Panel Replacement
in Body Front End.
- Remove the wiper transmission (3).
Refer to
Windshield Wiper Transmission Replacement
.
- Using the J 39232
,
separate the transmission link from the wiper motor crank arm ball stud.
- Remove the fasteners from the wiper motor to the frame assembly.
- Remove the wiper motor.
Installation Procedure
- Install the wiper motor onto the wiper transmission frame.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts in order to secure the motor to the frame.
Tighten
Tighten the wiper motor mounting bolts to 9 N·m (81 lb in).
Important: Lubricate the socket with Multi-Purpose Lubricant, Superlube, GM P/N 12346241
(Canadian P/N 10953474) or equivalent.
- Install the transmission drive link socket onto the crank arm ball of the wiper
motor using the J 39529
.
- Install the wiper transmission (3)
to the plenum. Refer to
Windshield Wiper Transmission Replacement
.