GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2009
🢒
Canyon Pickup - 4WD
🢒
Engine
🢒
Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L
🢒 Air Cleaner Assembly Replacement
Removal Procedure
Remove the air cleaner outlet duct from the air cleaner. Refer to
Air Cleaner Resonator Outlet Duct Replacement
.
Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor.
Loosen the integral air cleaner housing bolts (2).
Remove the air cleaner housing (1) from the vehicle.
Installation Procedure
Install the air cleaner housing (1) to the vehicle.
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the integral air cleaner housing bolts (2) to
15 N·m (11 lb ft)
.
Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
Install the air cleaner outlet duct to the air cleaner. Refer to
Air Cleaner Resonator Outlet Duct Replacement
.