GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Air Cleaner Assembly Replacement

Removal Procedure

    Object Number: 1969052 Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
  2. Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor (2).

    3. Object Number: 1969060 Size: SH
  3. Disconnect the secondary air injection (AIR) pump inlet hose (1) quick connect fitting from the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service.

    4. Object Number: 1969156 Size: SH
  4. Remove the air cleaner bolts (2).
  5. Remove the air cleaner assembly (1) from the vehicle.

Installation Procedure

    Object Number: 1969156 Size: SH
  1. Place the air cleaner assembly (1) into the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the air cleaner bolts (2).

    3. Tighten
    Tighten the bolts to 15 N·m (11 lb ft).


    Object Number: 1969060 Size: SH
  3. Connect the AIR pump inlet hose (1) quick connect fitting to the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service.

    4. Object Number: 1969052 Size: SH
  4. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor (2).
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.