GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement.

    2. Object Number: 1333091 Size: SH
  2. Disconnect the seat belt buckle electrical connector (1).

    3. Object Number: 1333095 Size: SH
  3. Remove the bolt (2) securing the seat belt buckle assembly (1) to the seat adjuster.
  4. Pull the seat belt buckle assembly (1) out though the opening in the seat cushion.

Installation Procedure

    Object Number: 1333095 Size: SH
  1. Install the seat belt buckle assembly (1) through the seat cushion pad.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).

    3. Tighten
    Tighten the front seat belt buckle bolt to 55 N·m (41 lb ft).


    Object Number: 1333091 Size: SH
  3. Connect the seat belt buckle electrical connector (1).
  4. Install the seat from the vehicle. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement.