GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 4WD 🢒 Transmission 🢒 Transfer Case - Isuzu T150 🢒 Transfer Case Adapter Replacement

Removal Procedure
  1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement.

    2. Object Number: 747102 Size: SH

    Note: The transmission mount DOES NOT have to be removed to perform the following service procedure.

  2. Remove the 2 transmission mount bolts.

    3. Object Number: 747100 Size: SH
  3. Position a transmission jack under the transmission.
  4. Lift the transmission just high enough to remove the transfer case adapter.

    5. Object Number: 1313619 Size: SH
  5. Remove the transfer case adapter mounting bolts.
  6. Remove the transfer case adapter from the transmission.
  7. Remove the transfer case adapter seal.

Installation Procedure

    Object Number: 1313619 Size: SH
  1. Lightly lubricate the transfer case adapter seal with clean transmission fluid.
  2. Position the NEW seal to the transfer case adapter.
  3. Install the transfer adapter to the transmission.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the transfer case adapter mounting bolts to the transmission and tighten the bolts to 50 N·m (37 lb ft).

    5. Object Number: 747102 Size: SH
  5. Lower the transmission to the transmission mount.
  6. Install the transmission mount bolts and tighten to 50 N·m (37 lb ft).
  7. Remove the transmission jack.
  8. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement.