GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 4WD 🢒 HVAC 🢒 HVAC - Manual 🢒 Mode Control Cam Replacement

Removal Procedure

    Note: The mode cam can be accessed from the driver side floor near the accellorator peddle.

  1. Remove the mode control cable (4) from the retaining clip (3).

    2. Object Number: 1273255 Size: SH
  2. Remove the mode control cable (4) from the mode cam (2).
  3. Remove the screw (1) from the mode cam.
  4. Remove the mode cam.

Installation Procedure

    Object Number: 1273255 Size: SH
  1. Install the mode cable (4).
  2. Make certain that the cable is properly seated in the notch in the HVAC module.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the mode cam screw. Tighten the screw to 2 N·m (18 lb in).
  4. Install the mode control cable (4) to the mode cam (2).
  5. Install the mode control cable (4) to the retaining clip (3).