GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Envoy XUV 🢒 Body 🢒 Body Rear End 🢒 Endgate Window Cross Car Adjustment

Adjustment Procedure

    Object Number: 902602 Size: SH
  1. Lower the endgate window approximately halfway down.
  2. Swing the endgate open.
  3. Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement .
  4. Loosen the window attachment clip bolts (1).
  5. Adjust the cross car position of the endgate window by turning the adjustment cam screw (2).
  6. Turn the adjustment cam screws to center the window to the opening with the rear roof applique.

    7. Notice: Refer to Fastener Notice in the Preface section.

  7. Tighten the window attachment clip bolts (1).

    8. Tighten
    Tighten the window attachment clip bolts to 10 N·m (89 lb in).

  8. Install the endgate window sealing strip to the endgate flanges. Refer to Endgate Window Outer Sealing Strip Replacement .
  9. Install the endgate trim panel. Refer to Endgate Trim Panel Replacement .