GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Envoy XUV 🢒 Body 🢒 Body Rear End 🢒 Midgate Window Adjustment

Adjustment Procedure
  1. Open the midgate.
  2. Loosen the midgate window run channel retaining screws. Refer to Midgate Window Channel Replacement .
  3. Close the midgate.

    4. Object Number: 1243192 Size: SH
  4. Lower the midgate window out of the midgate weatherstrip.
  5. Remove the midgate window regulator adjustment covers (2) from the midgate inner panel.
  6. Loosen the lower regulator attachment nuts (3).
  7. Adjust the fore/aft position of the midgate window by turning the adjustment screws (1).
    8. • To move the top edge of window rearward, turn the adjustment screws clockwise.
    • To move the top edge of the window forward, turn the adjustment screws counterclockwise.
    • Each revolution of the adjustment screw moves the top edge of the window 0.5 mm (0.02 in) forward or rearward.
    • Maximum adjustment is 6 revolutions in either direction.

    Notice: Refer to Fastener Notice in the Preface section.

  8. Tighten the lower regulator attachment nuts (3).

    9. Tighten
    Tighten the regulator attachment nuts to 25 N·m (18 lb ft).

  9. Tighten the midgate window run channel retaining screws. Refer to Midgate Window Channel Replacement .
  10. Install the midgate window regulator adjustment covers (2) to the midgate inner panel.