GM Service Manual Online
For 1990-2009 cars only

Hood Front Molding Replacement Rainier

Removal Procedure

  1. Open the hood.

  2. Object Number: 1277220  Size: SH
  3. Remove the bolts that retain the hood molding (1) to the hood.
  4. Release the clips that retain the hood molding to the front of the hood.
  5. Remove the hood molding from the hood.

Installation Procedure


    Object Number: 1277220  Size: SH
  1. Align the retaining tabs on the hood molding (1) with the slots in the front of the hood.
  2. Press the hood molding into place until the retainers are fully seated.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the bolts.
  5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  6. Close the hood.

Hood Front Molding Replacement Envoy, Envoy XUV

Removal Procedure

  1. Open the hood.

  2. Object Number: 742126  Size: SH
  3. Release the clips that retain the hood molding to the front of the hood.
  4. Remove the hood molding from the hood.

Installation Procedure


    Object Number: 742126  Size: SH
  1. Align the retaining tabs on the hood molding with the slots in the front of the hood.
  2. Press the hood molding into place until the retainers are fully seated.
  3. Close the hood.