Body Side Rear Window Garnish Molding Replacement TrailBlazer , Envoy

1. Remove the bolt that retains the seat belt upper anchor to the body.
2. Remove the garnish molding from the vehicle.

1. Install the garnish molding to the vehicle.
2. Install the seat belt retractor to the body.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the bolt that retains the seat belt anchor to the body.

Tighten
Tighten the anchor bolt to 70 N·m (52 lb ft).