Cargo Lamp Replacement Envoy XUV

1. Insert a flat-bladed tool into the slot located at the bottom of the cargo lamp lens.



2. Using the tool, carefully apply upward pressure to the cargo lamp. The upward pressure will cause the snap feature (1) to flex.
3. While maintaining the upward pressure. Remove the lower portion of the cargo lamp from the body trim panel.
4. Remove the upper portion of the cargo lamp from the trim panel.
5. Rotate the bulb socket and remove the socket from the cargo lamp.
6. Remove the cargo lamp from the vehicle.

1. Position the cargo lamp to the trim panel.
2. Install the bulb socket until fully seated to the cargo lamp.
3. Install the locating tab located at the bottom of the cargo lamp to the trim panel.
4. Push the upper portion of the cargo lamp into the trim panel ensuring the snap feature (1) is fully seated.