Front Fog Lamp Replacement Rainier

1. Remove the fog lamp bulb and socket (2). Refer to Front Fog Lamp Bulb Replacement .

Important: The fog lamp bracket is permanently attached to the fascia. Do not remove the fog lamp bracket from the fascia, replace only the fog lamp.




2. Remove the 2 push-pins (1) that retain the fog lamp to the fog lamp bracket.
3. Remove the aim adjustment screw (2) from the fog lamp.
4. Remove the fog lamp from the fog lamp bracket.

1. Position the fog lamp to the fog lamp bracket.
2. Install the 2 push-pins (1) that retain the fog lamp to the fog lamp bracket.
3. Install the aim adjustment screw (2) to the fog lamp.



4. Install the fog lamp bulb and socket (2). Refer to Front Fog Lamp Bulb Replacement .
5. Aim the fog lamp(s). Refer to Fog Lamp Aiming .

Front Fog Lamp Replacement Envoy, Envoy XUV, TrailBlazer

1. Remove the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement .



2. Remove the 3 nuts that retain the fog lamp to the fascia (2).
3. Remove the fog lamp from the fascia.

1. Install the fog lamp to the fascia (2).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 3 fog lamp retaining nuts.

Tighten
Tighten the nuts to 10.0 N·m (88 lb in).

3. Install the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement .
4. Aim the fog lamp(s). Refer to Fog Lamp Aiming .