GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Envoy XUV 🢒 Body 🢒 Roof 🢒 Moveable Roof Panel Wiring Harness Replacement

Removal Procedure

    Object Number: 1222232 Size: SH
  1. Remove the moveable roof panel Refer to Moveable Roof Panel Assembly Replacement .
  2. Remove the moveable roof actuator cover. Refer to Moveable Roof Panel Actuator Cover Replacement .
  3. Remove the lock pillar upper tie bar trim panel. Refer to Body Lock Pillar Upper Tie Bar Trim Cover Replacement - Cargo Compartment in Interior Trim.
  4. Disconnect the electrical connectors to the moveable roof assembly (3), moveable roof control module (1), and the moveable roof motor/actuator (2).
  5. Remove the moveable roof assembly connector retainers from the moveable roof assembly.
  6. Carefully lift up the moveable roof front beam panel until the roof assembly connectors can be pulled out from under the front beam assembly.
  7. Remove the moveable roof wiring harness from the vehicle.

Installation Procedure

    Object Number: 1222232 Size: SH
  1. Install the moveable roof wiring harness to the roof module.
  2. Carefully lift up the moveable roof front beam panel until the moveable roof assembly connectors can be inserted under the front beam assembly.
  3. Install the retainers securing the moveable roof connector to the front beam assembly.
  4. Connect the electrical connectors to the moveable roof motor/actuator (2), the moveable roof control module (1), and the moveable roof assembly (3).
  5. Install the lock pillar upper tie bar trim panel. Refer to Body Lock Pillar Upper Tie Bar Trim Cover Replacement - Cargo Compartment in Interior Trim.
  6. Install the moveable roof actuator cover. Refer to Moveable Roof Panel Actuator Cover Replacement .
  7. Install the moveable roof panel Refer to Moveable Roof Panel Assembly Replacement .