For 1990-2009 cars only
Circuit Description
The PCM sends engine/axle/tire IDs to the EBCM via serial data communications immediately after the modules are powered up.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC C0297 Powertrain Configuration Data Not Received
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The EBCM fails to receive serial data from the PCM.
Action Taken When the DTC Sets
If equipped, the following actions occur:
| • | The EBCM disables the TCS. |
| • | The traction off indicator turns ON. |
Conditions for Clearing the DTC
The conditions for setting the DTC are no longer present and you use the scan tool Clear DTCs function.
Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Scan Tool Does Not Communicate with Class 2 Device in Computer/Integrating Systems | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
