Electronic Traction Control Switch Replacement GMC, Chevrolet

1. Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.



2. Disconnect the electrical connector from the traction control switch.
3. Release the traction control switch locking tabs located behind the trim plate.
4. Remove the traction control switch from the trim plate

1. Position the traction control switch to the trim plate
2. Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
3. Connect the electrical connector to the traction control switch.
4. Install the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

Electronic Traction Control Switch Replacement Buick

Important: The console shift lever bezel must be removed prior to removing the traction control switch.

1. Remove the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.



2. Disconnect the electrical connector (1) from the switch.



3. Use a flat-bladed tool to release the ring tabs (1).



4. Remove the retaining ring from the switch.



5. Remove the switch (1) from the trim plate.

1. Install the switch (1) to the trim plate.



2. Install the retaining ring to the switch, ensuring the ring tabs are fully seated.



3. Connect the electrical connector (1) to the switch.
4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.