Adjustment Procedure
- Inspect the liftgate window for proper fit
to the liftgate window weatherstrip.
• | Open and close the liftgate window. |
• | If the liftgate window is hard to close, additional striker shims will
need to be added. |
• | If the liftgate window does not seal tightly against the weatherstrip,
striker shims will need to be removed. |
- Open the liftgate window.
- Loosen the nuts retaining the liftgate striker to the liftgate window.
Notice: Refer to Fastener Notice in the Preface section.
- Remove or add shims as determined above.
Tighten
Tighten the liftgate window striker nuts to 6 N·m
(53 lb in).
- Inspect the liftgate window for proper fit, readjust if necessary.
- Close the liftgate window.