GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Envoy - 2WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Roof Console Replacement

Removal Procedure

    Object Number: 741617 Size: SH
  1. Remove the 2 screws that retain the console to the roof panel.
  2. Release the front retaining tabs.
  3. Lower the console and disconnect the electrical connectors as needed.
  4. Remove the console from the vehicle
  5. If replacing the console, remove the garage door opener if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.
  6. If replacing the console, remove the OnStar ® microphone if equipped. Refer to Mobile Telephone Microphone Replacement in Cellular Communication.
  7. If replacing the console, remove the personal message player/recorder if equipped. Refer to Personal Message Player/Recorder Replacement in Entertainment.
  8. If replacing the console, remove the power sunroof switch if equipped. Refer to Sunroof Switch Replacement in Roof.
  9. If replacing the console, remove the noise cancellation microphone if equipped. Refer to Radio Volume Compensator Interior Noise Microphone Replacement in Roof.

Installation Procedure
  1. If replacing the console, install the noise cancellation microphone if equipped. Refer to Radio Volume Compensator Interior Noise Microphone Replacement in Roof.
  2. If replacing the console, install the power sunroof switch if equipped. Refer to Sunroof Switch Replacement in Roof.
  3. If replacing the console, install the personal message player/recorder if equipped. Refer to Personal Message Player/Recorder Replacement in Entertainment.
  4. If replacing the console, install the OnStar ® microphone if equipped. Refer to Mobile Telephone Microphone Replacement in Cellular Communication.
  5. If replacing the console, install the garage door opener if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.

    6. Object Number: 741617 Size: SH
  6. Position the console to the roof panel.
  7. Connect the electrical connectors as needed.
  8. Seat the front retaining tabs.

    9. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  9. Install the 2 screws retaining the console to the roof panel.

    10. Tighten
    Tighten the screws to 1.2 N·m (10 lb in).