Rear Seat Number 1 Cushion Latch Release Assembly Replacement TrailBlazer, Envoy, Bravada

1. Remove the rear seat cushion assembly from the vehicle. Refer to Rear Seat Cushion Replacement .
2. Remove the rear-seat cushion cover and the pad. Refer to Rear Seat Cushion Cover and Pad Replacement .



3. Remove the strap (1) from the rear seat cushion latch (2).



4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.

Tighten
Tighten the rear seat cushion latch release bolts to 10 N·m (88 lb in).




2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear-seat cushion cover and the pad. Refer to Rear Seat Cushion Cover and Pad Replacement .
5. Install the rear seat cushion assembly to the vehicle. Refer to Rear Seat Cushion Replacement .