Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views DEFINITION: The rear window washer is always ON and the rear window wiper operates normally. | |||
1 | Did you perform the Wiper/Washer System Diagnostic System Check? | Go to Step 2 | |
2 | Turn the ignition ON. Is the rear washer always on? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Is the rear washer always on? | Go to Step 5 | Go to Step 4 |
4 | Inspect for poor connections at the rear washer relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
5 | Repair the rear washer pump control circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 7 | -- |
6 | Replace the rear washer relay. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
