Info - Lower Control Arm Bracket to Frame Fastener Torque Specification and Tightening Sequence

This bulletin is being issued to clarify the torque specifications and the proper tightening sequence for the fasteners utilized to secure the lower control arm bracket to the vehicle frame. Whenever these fasteners are either loosened or removed for any reason, it is essential that these fasteners are tightened to specification following the correct tightening sequence in order to avoid damage to parts, systems and maintain correct front suspension geometry.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener.

If bolts were removed, install and hand start the lower control arm bracket mounting bolts to the frame.

Tighten

1. Tighten the FRONT lower control arm bracket mounting bolt to 260 N·m (192 lb ft).
2. Tighten the REAR lower control arm bracket mounting bolts to 240 N·m (177 lb ft).