Removal Procedure
- Remove the A/C line bracket nut.
- Remove the A/C line bracket from the oil level indicator tube stud.
- Disconnect the oxygen (O2) sensor electrical connector from the oil level indicator bracket.
- Remove the oil level indicator tube stud.
- Pull the indicator out of the tube.
- Pull the tube out of the block.
Installation Procedure
- Install the oil level indicator tube into the engine block.
- Add sealant to the oil level indicator tube stud threads. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the correct part number.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil level indicator tube stud.
Tighten
Tighten the oil level indicator tube stud to 10 N·m (89 lb in).
- Install the A/C line bracket to oil level indicator tube and secure with the nut.
Tighten
Tighten the A/C line bracket nut to 7 N·m (6 lb in).
- Connect the O2 sensor electrical connector.
- Install the oil level indicator into the tube.