Tools Required
J 41478 Crankshaft
Front Oil Seal Installer
Important:
• | Do not lubricate the oil seal sealing surface. |
• | Do not use the crankshaft front oil seal again. |
- Lubricate the outer edge of the oil seal (1) with clean engine
oil.
- Lubricate the front cover oil seal bore with clean engine oil.
- Install the crankshaft
front oil seal onto the J 41478
guide.
- Install the J 41478
threaded rod, with nut, washer, guide, and oil seal, into the end
of the crankshaft.
- Use the J 41478
in
order to install the oil seal into the cover bore.
5.1. | Use a wrench and hold the hex on the installer bolt. |
5.2. | Use a second wrench and rotate the installer nut clockwise until
the seal bottoms in the cover bore. |
5.4. | Inspect the oil seal for proper installation. The oil seal should
be installed evenly and completely into the front cover bore. |