Important Preliminary Checks Before Starting
Before using the Symptom tables use the following:
- | Ensure no DTCs are stored. |
• | Verify the customer complaint. |
• | Perform the Visual/Physical Check in this section. |
Locate the correct symptom in the list at the end of this section. Follow the procedures in the appropriate diagnostic table. If the condition can not be duplicated or is determined to be intermittent, refer to
Intermittent Conditions
.
Visual/Physical Check
Several of the symptom procedures call for a careful visual and physical inspection. This can lead to correcting a condition without further tests and can save valuable time. This inspection should include the following areas:
• | Inspect vacuum hoses for splits, kinks, and proper connections, as shown on Vehicle Emission Control Information label. Inspect thoroughly for any type of leak or restriction. |
• | Inspect the air intake ducts for being collapsed, damaged areas, looseness, improper installation, or leaking, especially between the mass air flow (MAF) sensor and the throttle body. |
• | Inspect for air leaks at throttle body mounting area, mass air flow (MAF) sensor and intake manifold sealing surfaces. |
• | Inspect the wiring harness for poor connections, pinches, cuts, or other damage. |
• | Inspect for loose, damaged, or missing sensors and/or components. |
Use the following tables when diagnosing a symptom complaint: