GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 730919  Size: SH
  3. Disconnect the harness connector (2) from the evaporative emission (EVAP) canister vent valve.

  4. Object Number: 730717  Size: SH
  5. Disconnect the EVAP vent pipe (3) from the EVAP canister vent valve (1).
  6. Disengage the bracket retaining tab (2) and remove the EVAP canister vent valve.

Installation Procedure


    Object Number: 730717  Size: SH
  1. Install the EVAP canister vent valve (1) on the bracket (2).
  2. Inspect for proper retention of the EVAP vent valve (1) on the bracket (2).
  3. Connect the EVAP vent pipe (3) to the EVAP canister vent valve (1).

  4. Object Number: 730919  Size: SH
  5. Connect the harness connector (2) to the EVAP canister vent valve.
  6. Lower the vehicle.