Removal Procedure
- Remove the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
- Remove the retaining clip from the fuel level sensor connector.
- Disconnect the electrical connector from under the fuel sender cover.
- Remove the sensor retaining clip.
- Squeeze the locking tangs and remove the fuel level sensor (3).
Installation Procedure
- Install the fuel level sensor (3).
- Install the sensor retaining clip.
- Connect the electrical connector to the fuel level sensor.
- Connect the retaining clip to the fuel level sensor electrical connector.
- Install the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.