Removal Procedure
- Raise and suitably support the vehicle.
Refer to
Lifting and Jacking the Vehicle
in
General Information.
- Disconnect the evaporative emission (EVAP) canister vent valve electrical
connector (2).
- Disconnect the EVAP vent pipe from the canister vent valve.
- Disengage the bracket retaining tab and remove the EVAP canister vent
valve.
Installation Procedure
- Install the EVAP canister vent valve onto
the bracket.
- Inspect for proper retention of the EVAP vent valve on the bracket.
- Connect the EVAP vent pipe to the EVAP canister vent valve.
- Connect the EVAP canister vent valve electrical connector (2).
- Lower the vehicle.