GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 730795  Size: SH
  1. Remove the fuel fill cap.
  2. Remove the fuel fill pipe housing.

  3. Object Number: 730799  Size: SH
  4. Remove the fuel fill pipe bracket nuts (2).
  5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  6. Object Number: 730802  Size: SH
  7. Remove the fuel fill pipe ground strap bolt (3).

  8. Object Number: 730806  Size: SH
  9. Loosen the fuel fill hose clamp (8).
  10. Separate the fuel hose (9) from the fuel fill pipe (7).
  11. Cap the open end of the fuel fill hose (9).

Installation Procedure


    Object Number: 730806  Size: SH
  1. Uncap the fuel fill pipe (9).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fuel fill pipe (7).
  4. Connect the fuel fill hose (9) to the fuel fill pipe (7).
  5. Tighten
    Tighten the clamp to 2.5 N·m (22 lb in).


    Object Number: 730802  Size: SH
  6. Install the fuel fill pipe ground strap bolt (3).
  7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  8. Lower the vehicle.

  9. Object Number: 730799  Size: SH
  10. Install the fuel fill pipe bracket nuts (2).
  11. Tighten
    Tighten the nuts to 10 N·m (89 lb in).


    Object Number: 730795  Size: SH
  12. Install the fuel fill pipe housing.
  13. Install the fuel fill cap.