GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Envoy - 2WD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E/4L65-E 🢒 Transmission Support Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the fuel tank shield. Refer to Fuel Tank Shield Replacement .
  3. If vehicle is a short wheel base (TrailBlazer, Envoy, Bravada, Rainier), remove the evaporative emission (EVAP) canister from its mounting bracket. Do not disconnect the canister lines. Refer to Evaporative Emission Canister Replacement in Engine Controls.
  4. Support the transmission with a transmission jack.

    5. Object Number: 744176 Size: SH
  5. Remove the transmission mount to the transmission support retaining nuts.

    6. Object Number: 745746 Size: SH
  6. Remove the lower transmission support to the frame mounting bolts.

    7. Object Number: 752138 Size: SH
  7. Remove the upper transmission support to the frame mounting bolts.
  8. Remove the transmission support from the frame.

Installation Procedure

    Object Number: 752138 Size: SH
  1. Install the transmission support to the frame.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the upper transmission support to the frame mounting bolts.

    3. Tighten
    Tighten the upper transmission support to the frame mounting bolts to 80 N·m (59 lb ft).


    Object Number: 745746 Size: SH
  3. Install the lower transmission support to the frame mounting bolts.

    4. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  4. Lower the transmission onto the transmission support.

    5. Object Number: 744176 Size: SH
  5. Install the transmission mount to the transmission support retaining nuts.

    6. Tighten
    Tighten the transmission mount to the transmission support retaining nuts to 46 N·m (35 lb ft).

  6. If vehicle is a short wheel base (TrailBlazer, Envoy, Bravada, Rainier), install the evaporative emission (EVAP) canister. Refer to Evaporative Emission Canister Replacement in Engine Controls.
  7. Install the fuel tank shield. Refer to Fuel Tank Shield Replacement .
  8. Lower the vehicle.