GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Envoy - 2WD 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Air Distributor Duct Replacement

Removal Procedure

    Object Number: 735949 Size: SH
  1. Remove the I/P assembly. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages and Console.
  2. Remove the driver side air distributor duct screws.
  3. Remove the air distributor duct (1) from the instrument panel.

Installation Procedure

    Object Number: 735949 Size: SH
  1. Install the air distributor duct (1) to the instrument panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the retaining screws to the air distributor duct.

    3. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  3. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages and Console.