Floor Air Outlet Duct Replacement - Left Side with JF4
Removal Procedure
- Remove the instrument panel (I/P) carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gages and Console.
- Remove the push pin (2) retaining the floor air outlet duct (1) to the heater module.
- Remove the floor duct (1).
Installation Procedure
- Install the floor air outlet duct (1) into position.
Notice: Refer to Fastener Notice in the Preface section.
- Install the floor air outlet duct retaining push pin (2).
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gages and Console.