GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
  2. Remove the front half of the water deflector in order to expose the door access hole.
  3. Remove the bolt retaining the front lower window run channel. Refer to Front Side Door Window Channel Replacement .

  4. Object Number: 723023  Size: SH
  5. Remove the 2 bolts that retain the check link to the pillar.

  6. Object Number: 723020  Size: SH
  7. Remove the rubber dust boot from the check link in order to gain access to the door retaining nuts.

  8. Object Number: 723022  Size: SH
  9. Remove the 2 check link retaining nuts from the door.
  10. Remove the check link assembly through the door access hole.

Installation Procedure


    Object Number: 723022  Size: SH
  1. Install the check link assembly through the door access hole. Ensure that the position arrow is pointing forward.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 2 check link retaining nuts to the door.
  4. Tighten
    Tighten the nuts to 7 N·m (62 lb in).


    Object Number: 723020  Size: SH
  5. Install the rubber dust boot to the check link.

  6. Object Number: 723023  Size: SH
  7. Install the 2 bolts that retain the check link to the pillar.
  8. Tighten
    Tighten the bolts to 15 N·m (11 lb ft).

  9. Install the front lower window run channel. Refer to Front Side Door Window Channel Replacement .
  10. Install and fully seat the water deflector.
  11. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .