GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Envoy - 2WD 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Rear Wiper Park Replacement

Removal Procedure

    Object Number: 751298 Size: SH
  1. Remove the liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.
  2. Remove the 2 bolts retaining the wiper arm park ramp to the liftgate.
  3. Remove the wiper arm park ramp from the vehicle.

Installation Procedure

    Object Number: 751298 Size: SH
  1. Install the wiper arm park ramp to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 bolts retaining the wiper arm park ramp to the liftgate.

    3. Tighten
    Tighten the 2 bolts to 9 N·m (79 lb in).

  3. Install the liftgate interior trim panel. refer to Liftgate Trim Panel Replacement in Body Rear End.